Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
miamigtimark

Quick Question 205 Gti6 Starting.

Recommended Posts

miamigtimark

Turning mine over for the first time since swap.

Starter is turning constantly on second stage of ignition without let up until i switch the ignition back off. (ie not working from third stage as pre conversion).

What have i done wrong??

TIA . Mark.

Share this post


Link to post
Share on other sites
miamigtimark

Just to clarify . Ive used the switched live set up using my original 1.6cc battery positive cable through to the starter and onto the alt.

Cheers!

Share this post


Link to post
Share on other sites
pug_ham

Are you sure you haven't cross connected the starter wire with the alternator field wire on the engine?

 

Graham.

Share this post


Link to post
Share on other sites
Anthony

On the two brown multiplugs under the dash you've probably just got the ignition (thick red, wire #2) and starter (thick blue, wire #46) wires round the wrong way, as Peugeot swapped them over between Phase 1.5 and Phase 2, and thus conversion wiring guides written for one are wrong for the other.

Share this post


Link to post
Share on other sites
miamigtimark

Thanks for the help lads.

Anthony: Absolutley on the money.

Many many thanks!!! :rolleyes:

Share this post


Link to post
Share on other sites
Sign in to follow this  

×