Crank Shaft Position Sensor

[stuart1298 6]

can not find crank shaft position sensor mounting area

changed from auto to manual

[Michael 0]

Maybe you have an early BE1 gearbox without mounting hole for the crankshaft position sensor. It should be on the same location as on your auto box.

[stuart1298 6]

the box is out of a 91 'j' plate, the reverse is under 5th, the crank shaft sensor one the 1.6 engine had a little bracket on it, i havent got the auto box from the turbo engine, is there any way i can by pass it, as from what i no, i cant, and pretty much f**ked!!

[welshpug 1,666]

thats just a speed sensor for diagnostic purposes on the 8v engine, you need to get a TDC sensor that goes in the top of the bellhousing not on the back.

[stuart1298 6]

it doesnt look like there is any where for it to go, any ideas, and what sensor would i need? i fort things were going to well, lol

[peter 20]

Your gearbox will definatly have the hole for the sensor, right on top of the gearbox above the flywhell....

 

as for the sensor its a just a black thing with a 3 pin plug that bolts to the gearbox!

 

you definatly cant bypass!