Power Steering Fitting On 2.0l 8v Turbo Engine

[stuart1298 6]

Hi there, finaly getting somewhere with the turbo engine, bit by bit its being cleaned and painted, and reassembled.

 

i have power steering on my 205, and i need it as i'm rather week, lol, has anyone made a braket up to hold the pump to the engine, or no of what one i can use,

 

belts not a problem, as i'll just feed a bit of string round all the pulleys, and meassure it, problem solved for the belt,

[Miles 331 1 Cars]

They all came with P/S as std so the mounts will be there unless someones cut em off

[stuart1298 6]

They all came with P/S as std so the mounts will be there unless someones cut em off

 

will i be able to mount my pump on there and the pump sit in the right place for the belt?

[Miles 331 1 Cars]

Most 406's etc all use the same front engine mount, So worth popping down the scrappy for a nose, But if its the XM version as I've seen in your post I guess you have a Alloy top mount?

[stuart1298 6]

yeah, its an xm

 

i belive it is alloy from memory, i have just recieved a gti6 mount and alternator bracket so homping that will be the bits i need

[Miles 331 1 Cars]

That will be the one, The ally XM one doesn;t work with a normal Pump,

the iron one should be a huge lump

[stuart1298 6]

That will be the one, The ally XM one doesn;t work with a normal Pump,

the iron one should be a huge lump

 

some one said i need to use the gti6 pas pump and alternator, or can i modify the bracket to take the xm alternator n 205 pas pum