Heater Water Hose - 1.6 Gti 1988

[Guest GaryM]

I need to replace this hose which has two different diameters at either end, which makes it hard to find. Peugeot don't make or sell them any more so I am having difficulty getting one. The diameters are 16mm at one end and 22mm (or maybe 19mm, it's hard to measure!), at the other end. Any ideas where i can get this part? I don't really want to try joining two separate hoses. Cheers.

[happygoron 2]

A company called BakerBM do them and give discount to forum members, look in the group buy forum at the bottom. Make sure you get the right one as I think they change after '92.

 

My topic on what I assume to be the same hose:

http://forum.205gtidrivers.com/index.php?s...=122305&hl=

Edited October 12, 2010 by happygoron

[NeilGTi85 5]

My hose recently burst on my CTI, from the header tank down to the inlet on the block.

 

Both ends a diffrent size, part was n/a so I used some silicone tape around the outlet on the header tank.

 

Worked a treat if you need it fixed asap, otherwise I would order a hose from the above!