NeilGTi85 5 Posted September 30, 2010 Just about finished unplugging, labeling and and dismataling the gti6 lump in my 205, on removing, is there enough room to lift the engine with the box? or do I have to split it? (I do have a load leveler so I can tilt it, master cylinder and header tank still in place though) Thanks in advance Share this post Link to post Share on other sites
Paul_13 212 1 Cars Posted September 30, 2010 (edited) Should go mate, take the inlet off and use the balance bar to tilt the gearbox down towards the floor and it should come out. I lifted mine out with exhaust mani on which I think may be unheard of and that was with a Xsara box. Edited September 30, 2010 by Paul_13 Share this post Link to post Share on other sites
Toddy 7 Posted September 30, 2010 It will come out complete, just angle the gearbox lower than the engine, and remove the battery tray/gearbox mount. Share this post Link to post Share on other sites
Spiky 37 Posted September 30, 2010 It will come out complete, just angle the gearbox lower than the engine, and remove the battery tray/gearbox mount. bang on and will be doing them with mine in the next few weeks, so much easier this way Share this post Link to post Share on other sites
NeilGTi85 5 Posted September 30, 2010 Perfect, cheers chaps Share this post Link to post Share on other sites
