Lost Locking Wheel Bolt Key

[Silky 33 1 Cars]

As a few people have said, 14mm socket over the small rounded part of the locker, I've done this a few times and it's worked fine.

 

My mate has also used a Snap-on socket with a reverse type thread inside it, took them off even easier

[pugpete1108 62 1 Cars]

i had one of these on the last xsara, i couldnt get it off for love nor money and neither could my local tyre place (although they didnt use a reverse thread thingy)

 

had to drill it in the end. which wasnt too bad if you are methodical seeing as they are quite weak metal. work up to a 13mm which is just wider than the threaded part and keep going till the head comes off.

 

i 'borrowed' a nice bosch bit from b&q and it made light work of it using plenty of cutting oil.