Water In Cylinders

[cheesegrater 43 1 Cars]

Basically some water from the inlet manifold gasket area got into at least two of my cylinders/head when I removed the manifold. What is the best way of removing said water ? I've removed the spark plug and turned the engine over several times would this be sufficient? I can still see slight wetness down the bores.

Thanks

Tom.

[Anthony 1,003]

That'll be fine - spray a bit of WD40 or similar in there if you're not going to be using it for a while to prevent the bores rusting

[cheesegrater 43 1 Cars]

That'll be fine - spray a bit of WD40 or similar in there if you're not going to be using it for a while to prevent the bores rusting

Cool beans cheers, I've done what I needed to do so I'll bang it back together!

Thanks.

[Paul_13 212 1 Cars]

Put some petrol down and ignite it?

 

Can you wait til I drop the fuel pump off I wanna see it