M9 X1.25 Bolt Approx 60mm

[kyepan 291]

My usually reliable apex fastenings in slough can't get this, or order it.

 

It's for my mazda to hold the aircon compressor on, and mazda... are.... well... useless, like seriously useless.. and i can't get sense out of them, and they don't like me because its not a uk vin... (rolls eyes), and there is no service box, and one forum has been hacked, the other is american, and the other is up it's own arse, and you need to pay to sign up...

 

you lot are a bit dynamic and daring, probably nigh on blood hounds when it comes to bolts.. and bolt related technology..

 

anyone know where to get them from?

 

Thanks in advance,

 

J

[Ryan 99]

I had to buy some 9x1.25s a few years ago and they're impossible to find - worse than the 7mm stuff Peugeot like to use.

 

These guys have them (65mm long) if you don't mind the weird square heads, or paying £3 each for them

 

http://www.mdr.co.uk/candg/pmk_Bugatti_web.html

Edited September 21, 2010 by Ryan

[Tom Fenton 1,542]

Could you not go up to an M10?

[kyepan 291]

I had to buy some 9x1.25s a few years ago and they're impossible to find - worse than the 7mm stuff Peugeot like to use.

 

These guys have them (65mm long) if you don't mind the weird square heads, or paying £3 each for them

 

http://www.mdr.co.uk/candg/pmk_Bugatti_web.html

luckily they had pics

 

This is what they have on the site, unfortunalty i need a thread all the way along.

 

thanks for the suggestion though.

 

J

[kyepan 291]

bumpety bump

[Tom Fenton 1,542]

Could you not go up to an M10?

??

[Alastairh 47]

Could you not get a chassis number for a uk car?