Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
205*31*

Big Gap Between Lights :(

Recommended Posts

205*31*

I recently fitted some standard orange indicators and there is massive gap between headlight and these anyone know what I has happened fitted them properly as far as I am aware, I gather its an MOT failure too with such a big gap?

post-15249-1284660229_thumb.jpg

post-15249-1284660264_thumb.jpg

Share this post


Link to post
Share on other sites
j_turnell

You sure the headlight is pushed in correctly and the spring over the lug on the side of the headlight? They should just push in and push the spring up. Could be a poor fit from pattern replacements, are they valeo items?

Share this post


Link to post
Share on other sites
Daviewonder

You need to loosen the nuts and bolts that fix the headlight/indicator brackets to the car and realign them :)

Edited by Daviewonder

Share this post


Link to post
Share on other sites
blessed6383

dont the indicators have like locator things on them on headlight side of indicators so they are a tight fitment to the head light? i know my clear ph 2 do

Share this post


Link to post
Share on other sites
welshpug

looks like its had a front end shunt in the past, as Davie said, you need to loosen the nuts and align everything up, starting with the outer headlamp adjuster/indicator bracket.

Share this post


Link to post
Share on other sites
Henry Yorke

Didthe original side indicators do that? If not then it is an alignment thing. As has been said, you need to take the headlights out first, fit and secure the indicators and then put the headlights back in, making sure they go over the clips on the side indicator.

Share this post


Link to post
Share on other sites
205*31*
Didthe original side indicators do that? If not then it is an alignment thing. As has been said, you need to take the headlights out first, fit and secure the indicators and then put the headlights back in, making sure they go over the clips on the side indicator.

 

well the original ones were clear ones I didn't like but no there was no where as much of a gap with those in :unsure: will try taking them out and fitting again.

Share this post


Link to post
Share on other sites
JRL

Mine did that when I replaced a broken lense. with a bit of perseverance it should line up a bit better.

Share this post


Link to post
Share on other sites
yeti-dj

looks to me like you need to remove the headlights and check that the locator springs in the indicators are in there, there is no adjustment for the gap between the headlight and indicators, unless they are just poor pattern parts that dont fit properly.

 

cant see why it would fail an mot if every thing works correctly.

Share this post


Link to post
Share on other sites
MerlinGTI

I've been playing 'align the front end' today. Fiddley and time consuming to get right. All my adjusters had rotten fixings to add to the fun. Ended up drilling them all out.

 

Your bonnet/ wing gaps are all over the shop too mate. Set aside half a day to align everything (if your fussy)

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×