Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
blessed6383

Citroen Wiring Issues

Recommended Posts

blessed6383

:lol: have wired my bx loom in this morning but seems to have no ignition amp or coil wires to put in any ideas?

 

have made a seperate loom for sensors, starter/ alternator etc but what should i do about the others?

Share this post


Link to post
Share on other sites
Anthony

The ignition amp and coil bits are on a seperate plug-in section on BX looms - did you not get this with the loom?

Share this post


Link to post
Share on other sites
hexhamstu

It's as anthony says there are 2 parts to the loom, I can take photos of my BX loom tomorrow showing the 2 parts if you want?

Share this post


Link to post
Share on other sites
hexhamstu

Found a picture I took of it ages ago.

 

coilloom.jpg

Share this post


Link to post
Share on other sites
blessed6383

didn't get this bit so will now need it aswell, cheers for the info guys also bit stuck with the under dash wiring

 

1. Blue wire with spade connector = permanant 12V = have this wired in to shunt box

2. Yellow wire near the ECU = fuel pump = have this wired up to 76 white wire

3. Yellow wire in a white 2-pin plug = Switched 12v = ?

4. Green wire in the same plug = rev-counter. = ?

 

only green and yellow wires i have found are going into a white plug at end of loom near afm plug

 

any help guys as im fuc*ed if i know as not sure if have other bits of wiring missing?

 

cheers

Share this post


Link to post
Share on other sites
jackherer

The two wires you can't find are on the bit of loom you don't have.

 

You can see the plug in Stu's pic above.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×