Please Help Me Find What I'm After

[Daviewonder 533 3 Cars]

Hi, I'm after one of those things that looks a bit like a garden hose connector (suppose you could call it a fancy gromit) that wiring passes through from the engine bay to the cabin. This really is the only way I can describe it, sorry.

 

Any ideas please?

[welshpug 1,666]

the engine loom one is moulded onto the loom, unless you men the smaller ones on the opposite side?

[Tom Fenton 1,548]

Vehicle Wiring Products, sell the bulkhead fittings and convoluted tube to make a tidy job.

[Masekwm 2]

I'm in the same boat, busy cutting off the old and then fitting one from VWP one to the bulkhead

[Daviewonder 533 3 Cars]

Thanks for the quick replys Guys

 

Vehicle Wiring Products, sell the bulkhead fittings and convoluted tube to make a tidy job.

 

 

Cheers Tom, thats exactly what I'm after.

[Tom Fenton 1,548]

Here is how I did my turbo car. Ally plate that bolts over the large hole where the standard loom goes thru. Means that my loom can be pulled through from inside the car to the outside should I wish to remove it.

[DrSarty 90 1 Cars]

These 'grommet' things are also known as 'glands', although they are slightly different things.

 

Maplin also sell them.

[HERMAN 33]

I used a large multi gromment off a Volvo truck. I might have a spare knocking about if you are interested?

 

[Tom Fenton 1,548]

Here is how I did my turbo car. Ally plate that bolts over the large hole where the standard loom goes thru. Means that my loom can be pulled through from inside the car to the outside should I wish to remove it.

 

Cock, there was supposed to be a pic attached to that post!

 

here it is

 

[DrSarty 90 1 Cars]

^^^

 

That's what I believe is known as a 'gland', whereas the Volvo sourced item in the previous pic is what I would call a gommet.