Heater Matrix

[bearmach 0]

Hi If this topic is already been done i apologize, I need help on changing heater matrix, looked in manual and it say`s to srip half the dash, after doing this still can not remove the heater console, I looked at just removing the heater matrix but there is to much in the way, is there a link to this topic. any help is welcome.

[Matt Holley 11]

All you need to remove to do the matrix is the panal under the steering wheel, I did mine a few months back and although I had to lean in over the door bars it wasn't a bad job to do.

[Matt Holley 11]

Heres a topic with a guide in it http://forum.205gtidrivers.com/index.php?s...matrix&st=0

[lemmingzappa 75 1 Cars]

As said, you can do it if you lean over the sills and slide the matrix out towards you. Take your time when refitting the pipes that go to the matrix though as the nuts & bolts can be fiddly. You don't want to lose them down the side of the console !

Edited August 15, 2010 by lemmingzappa