Idle Mixture Setting

[Vz_ace 0]

Hi, experts!

 

So, was playing with that idle-mixture screw a little and now i'm lost;). i noticed, that it affected low-rpm area. how can i as best as possible adjust the mixture at home, without a emission tester? how many turns from the end is the screw usually set?

 

thnaks guys,

 

Vlado

[matyasg 0]

Hi, experts!

 

So, was playing with that idle-mixture screw a little and now i'm lost;). i noticed, that it affected low-rpm area. how can i as best as possible adjust the mixture at home, without a emission tester? how many turns from the end is the screw usually set?

 

thnaks guys,

 

Vlado

Hi, there is a pinned topic "Brilliant 2row Ecu Guide..." ( http://forum.205gtidrivers.com/index.php?showtopic=82724 ) , where you can download CAPS.

You will find all info you need about AFM adjustment.

I don't know if your ECU is a 2-row or not but both uses the same ...202 AFM.

I think those values (ohms and voltages) in CAPS will be great as a starting point.

[Vz_ace 0]

Hi, there is a pinned topic "Brilliant 2row Ecu Guide..." ( http://forum.205gtidrivers.com/index.php?showtopic=82724 ) , where you can download CAPS.

You will find all info you need about AFM adjustment.

I don't know if your ECU is a 2-row or not but both uses the same ...202 AFM.

I think those values (ohms and voltages) in CAPS will be great as a starting point.

 

 

oh,great! thanks pal.

[Vz_ace 0]

yesterday I measured resistnces of the AFM (on pins 2-3,2-4) and compared measured values with ones,listed in CAPS. My values are erratic (maximum res. is somewhere in the middle flap position and is about 1.2 kohms); and when the flap is fully opened, the resistance drops (to about 0.8kohms). is that ok?

 

How can i clean the wiper path?