Toad Alarm Connections

[Miles 331 1 Cars]

Just looking for some info on how to connect the wires from the Siren to main Alarm box 4 way conector as the sticker on it is wrong with the 4 colours over lapping each other and the main alarm box wires being black doesn;t help much either

 

Any help would be great

[dee205 3]

I have the instalation documents on my other pc if that's any use to you let me know.

[Anthony 1,003]

I've got the Toad Ai606 installers installation document that I can email you if you need it Miles - just let me know your email address

 

It's not particularly helpful with regards this point, but from what I can make out, the alarm module side of the 4-pin plug should be wired as follows...

 

Pin 1 - #1 Black (to alarm module)

Pin 2 - #7 Black (to alarm module)

Pin 3 - #10 Black (+12v)

Pin 4 - #9 Black (Ground)

[Miles 331 1 Cars]

Thats the info I have on the install manual, the leads from the Siren are all colours, Blue, Red, Brown and Yellow I think and the plug has a sticker around it telling you which pins to plug them into, But the stickers wrong and the yellow covers 2 pins and without pulling the pins out too often it's not worth trying a lucky guess.