Dellorto 45's Vs Gsxr 1000 Throttle Bodies

[vickiw106 1]

Hi I have a dilemma and need your help

 

My engine in nearly finished from a full rebuild, and I have a choice to make as far induction is concerned

 

I have two setups running on mega squirt v2.

 

1st setup is dellorto 45's (with distributor less ignition)

 

2nd setup is gsxr 1000 throttle bodies,

 

Both setups are ready to bolt on; all I have to do is get a wiring loom built.

 

Any thoughts

 

Thanks

Ian

[welshpug 1,661]

depends how good the GSXR inlet manifold is.

[DrSarty 90 1 Cars]

...and how thorough the mapping is afterwards.

[welshpug 1,661]

indeed, or even how well you can set the carbs up.

[Baz 421]

And the throttle linkages/actuation on the bike carbs...

[omega 82]

............but if you want something easy

[welshpug 1,661]

then give Colin Satchell the bodies and a wedge of cash and get sandy to map it