Help Needed On Parts!

[Kenno 3 2 Cars]

Hi all, im off to the ring this wknd coming and wanted a few spare parts and some upgraded bits and hope maybe some one know the answers lol

 

Im after bits Part no`s & price for the 1.9 mi16 engine.

 

New 82 degree stat ( have rang QH and they dont have any that will fit!)

 

New dizzy cap and rotor arm, are GSF the cheapest?

 

also have fitted a mocal oil cooler and the fitting oil sandwich plate that I was told would fit dont! so ordered another from rally desings and that seems to be even more different! ( what am I doing wrong? )

 

A set of new ignition leads? are GSF over priced?

 

Am off on fri morn so hoping someone out there can help please please please X

[Anthony 1,003]

Oil cooler sandwich plate should be the same as an 8v or any other XU engine.

 

Halfords should do the 82 degree 'stats Kev - that's where I've always got them from, although I think they're listed under 8v (but have both sized seals in the box). Some of those that I've bought have been QH branded.

 

Partco used to he fairly cheap for Mi caps and arms, but no idea if that's still the case as I've not bought any for a while.

[Miles 331 1 Cars]

Get along to Think Automotive, In Isleworth they have these on the shelf,

The water stat's unless you;ve converted to 8v set up (Blanked off the horrid rear wtaer pipe) then you need the 16v stat which is a 2 stage one,

GSF are or where expensive for Arms and Cap's, Try a Factors or even Halfords!!, HT Leads where poor the last set I got from GSF

[Kenno 3 2 Cars]

Update! right well the sandwich plate adapter ( the part with the male and female thread ) seems to be diferent! im am confused I ordered a new plate and adapter & it was the same as the last one? smaller internal dia and looked like a different thread! and when you srew the oil filter on it is as loose as a britney spears!

 

I also rang the supplier of the mocal parts & they sent me the same part today and it still dont fit!! is it me or am I going mad!!!

[Miles 331 1 Cars]

Your going mad, Every oil thread is the same

[Tom Fenton 1,542]

Peugeot use 20x1.5 if I remember right, but other cars use a 3/4" thread which is close but not the same.

[ade 4wd 11]

The Peugeot 205 uses an oil filter with M20 x 1.5 thread. Mocals catalogue is wrong, they list the thread as 5/8 UNF.