Part Identification

[Moz_Goodwood 0]

got a bootful of spares with my new goodwood but could do with some part naming, ive got a rough idea just need it confirming, what they are and what they are for (which engine / mark etc)

 

cheers in advance

 

paul

 

 

 

 

 

 

 

 

[Moz_Goodwood 0]

got some more aswell

 

 

 

 

[Anthony 1,003]

You've got an S16 cylinder head, what looks like an early non-aircon XU10 sump, both parts of an S16 inlet manfold, and an Mi16 inlet manifold. Downpipe I've seen before, but not 100% sure on who they're made by.

[welshpug 1,666]

S16 inlet manifold plastic twin pipe section.

 

sump looks like S16 but the baffle is missing.

 

Twin pipe 8 valve downpipe, janspeed IIRC.

 

grotty 2.0 RFY head.

[Moz_Goodwood 0]

cheers peeps

 

just jogged my memory i can remember him telling me he was playing around with the sump and that i might aswell chuck it

 

i take the head is only good for a rebuild or scrap?

 

thanks again

[welshpug 1,666]

sump looks fine, bar the missing baffle, easy enough to get or make one, still has the temperature sensor in it.

 

head needs at least cleaning up and pressure testing, if not a light skim.

Edited July 28, 2010 by welshpug

[Moz_Goodwood 0]

ok cheers for that

 

the head and sump are now free to a good home every one, pick up from tf2 (telford shropshire)

[Anthony 1,003]

Being a bit cheeky, but it I covered postage, would you be prepared to pop the temperature sender from the sump in the post to me?

 

I would have taken the head, but I'm not going to be up your way for a few weeks and I guess that you'd want it gone before then?

[Moz_Goodwood 0]

Being a bit cheeky, but it I covered postage, would you be prepared to pop the temperature sender from the sump in the post to me?

 

I would have taken the head, but I'm not going to be up your way for a few weeks and I guess that you'd want it gone before then?

 

when are you back up here roughly? i can keep hold of them if you want, ive got space to keep them

[Moz_Goodwood 0]

oh and i'll send the temp plug now if you like, dont worry about the money it'll only be a few pence

[Anthony 1,003]

Cheers, that's much appreciated - I'll drop you a PM with my address shortly

 

As for the head, I'm honestly not sure when I'll next be up, but I'd imagine it'll be September at some point. If you've still got it when I'm next up your way then I'll grab it, but otherwise, if someone else wants it and can collect in the meantime, let them take it.

[Moz_Goodwood 0]

ok mate, let me know when you your up next and i'll let you know if i still have it