Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
flyfisher

Rust On 205 Gti

Recommended Posts

flyfisher

just wondered anyone else has seen this rust above o/s/f door/window on phase two cars when i say window i mean window in qtr panel. is this common or am i just unlucky to find this

Share this post


Link to post
Share on other sites
blessed6383
just wondered anyone else has seen this rust above o/s/f door/window on phase two cars when i say window i mean window in qtr panel. is this common or am i just unlucky to find this

 

think the ph2 just seem to rust worst than ohers as my (k) 92 car has had bit welded front N/S inner wing and floor of the boot has a small hole N/S aswell yet few years back when i had my old ph 1.5 89 (f) had not a single bit of rust on it

Share this post


Link to post
Share on other sites
jackherer

I've got an '89 F reg phase 1.5 shell outside with rust forming above the rear quarters. First time I have seen it there on anything other than an early phase 1.

 

Every time the cracks in the paint that all 205s seem to have there have been discussed over the years the response has always been that they all do it and its nothing to worry about but clearly its not good to leave a route open for moisture to get in and they will eventually start to bubble quite badly.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×