Constella Gti6 Dizzy Converter

[stef205 92 1 Cars]

hi, im due to start my gti6 conversion and found a gti6 dizzy converter while searching through ebay and was wandering would i gain anything from the gti6 lump buy using the dizzy from the gti engine, and it also says i can use the gti loom could someone clear this up for me please many thanks

[CosKev 16]

Sure you don't mean MI16 dizzy converter

 

The Gti6 runs totally different management/sensors/loom.

 

Its much more advanced,and makes the car MUCH nicer to drive

 

You can get converted plug and play looms off here,Spiky and Miles are two that can supply them

[j_turnell 137 3 Cars]

Complete and utter bodge, get the standard 6 loom modified.

[stef205 92 1 Cars]

no its listed for a gti6 engine, this is also what made me ask. I have pm spiky recently about him making me up a loom but i was only asking if there was any gain from it.

[welshpug 1,661]

what James said, just do it properly

 

you will lose power by running a distributor.

[yeti-dj 7]

i second third and fourth the vote for just getting the correct loom, such a nice engine in the 205 so do it right..

[GTI6BOY 29]

Is the constella adapter not for running carbs?

[marksorrento205 80]

I cant see the point in running the dizzy adaptor on either a mi or a 6 engine. They are not hard to wire in the standard management of the engine and you get better results. The guide for either engine is on here so so many times too They say its so you dont have to bother with the 6 loom.

 

Ebay link

Edited July 18, 2010 by marksorrento205

[stef205 92 1 Cars]

i was always planning on using the orignal loom and ecu. thanks for clearing things up for me

[CosKev 16]

I cant see the point in running the dizzy adaptor on either a mi or a 6 engine. They are not hard to wire in the standard management of the engine and you get better results. The guide for either engine is on here so so many times too They say its so you dont have to bother with the 6 loom.

 

Ebay link

 

So you would have to run AFM etc/bin MAP sensor etc off Gti6 inlet

 

Or is it just designed for carbs as above????????

[marksorrento205 80]

Kev,

 

Thats how I read it. Just like the mi16 one. Use all the 205 stuff. If your running a dizzy you will have to ditch the coil packs as you will need leads etc. Maybe it is designed for carbs? Its a product for those who cannot get the head around the wiring or do not have the confidence to tackle it. But you are not going to get good results from it! Are you!

Edited July 19, 2010 by marksorrento205

[Alastairh 47]

An expensive paper weight. And that's putting it polietly.

 

Al