What Connector Is This?

[205*31* 0]

Ok on fitting my sad I have pulled out one of the wires that goes into ecu temp connector no way I could repair it it was a very dodgy wire connection to be honest looked abit corroded

 

I have found a redundant 2 pin female terminal connector in engine bay it has a pink and brown wire not doing anything so I have chopped wires of this and wired it accordingly to the 2 ecu temp wires works great now but what connector have I pinched I thinking possibly a fog light as I have none.

 

anyone any ideas?

[welshpug 1,666]

sounds like it bay be the reverse light switch plug.

[Have-a-go-al 0]

Its not a brown plug that normaly sits on the rocker cover ?

 

Appears to come from a crank angle sensor ?

 

Allan

[205*31* 0]

Its not a brown plug that normaly sits on the rocker cover ?

 

Appears to come from a crank angle sensor ?

 

Allan

 

hi allan no it wasn't a brown plug was a white plug. I think welshpug is on the right track as I know on top of the gearbox there is a 2 pin male connector with nothing in it I am guessing this is the reverse light switch.

[large 33]

I would go with WP as the plugs for the reverse light and the ecu temp sensor are the same.