Exhaust Diameter 1900 Gti (standard Size)

[blessed6383 0]

does anyone happen to know or could measure a ph1.5 middle section where it joins the down pipe and again on standard back box please

 

and is it sleeved on the downpipe-middle section or bolts with spring clamps?

 

thanks

[welshpug 1,666]

its neither sleeved nor bolts and spring clamps for the downpipe to centre section on later P1.5 cars, its welded on.

 

the rear box is a round flange-olive type joint.

 

phase 1 IIRC is 1"7/8ths or thereabouts, 54mm clamps.

[blessed6383 0]

cheers bud

 

must be ph1 then as thought it was later type and downpipe fitted was aftermarket so didn't know if standard would fit

Edited July 9, 2010 by blessed6383