Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
zx-vts

Hybrid Box Issues

Recommended Posts

zx-vts

hi guys, I need some advice regarding be1 and be3 gearbox. I had planned to use the gear set (1st-5th) from a 1.9 gti be3 box with a xsara vts crown wheel and pinion and case it turns out due to a dodgy ebayer ive ended up with a be1 box. basically i need to know if the gear sets (1st-5th) from a be1 and a be3 are interchangable and will I have any issues with reverse? Im unsure of the difference between the 2 box's other than where reverse is on the gear stick. cheers in advance.

Share this post


Link to post
Share on other sites
Miles

Yes you will, Only a couple of gears are the same plus the VTS output shaft is longer

Share this post


Link to post
Share on other sites
luggy

Be1 and Be3 are interchangeable if your putting BE1 gearset into a BE3 you need to flip 1st and 2nd gear selector (because it has the reverse gear attached) and flip the reverse idler gear.

Did this for a forum member who had motronic management on an s16 conversion but had a Be1 box and didnt have the CPS hole in the gearbox and transferred it into a BE3 casing for him. :)

Share this post


Link to post
Share on other sites
Miles

Doesn't always work as there are slight differance's, even the gears are cut differently thruout the years

Share this post


Link to post
Share on other sites
zx-vts

Thanks guys, i think I'm back on the hunt for a be3 from a 1.9, Im not even sure which car the be1 came from.

 

do all be1 box's have reverse next to 1st?

Edited by zx-vts

Share this post


Link to post
Share on other sites
alync406
Thanks guys, i think I'm back on the hunt for a be3 from a 1.9, Im not even sure which car the be1 came from.

 

do all be1 box's have reverse next to 1st?

 

Yes reverse is beside 1st on all BE1's.

Share this post


Link to post
Share on other sites
pugpete1108
Thanks guys, i think I'm back on the hunt for a be3 from a 1.9, Im not even sure which car the be1 came from.

 

do all be1 box's have reverse next to 1st?

 

do you have a 1.9 be1 unit for sale then?

 

pete

Share this post


Link to post
Share on other sites
zx-vts
do you have a 1.9 be1 unit for sale then?

 

pete

 

possibly mate, Make me an offer.

Share this post


Link to post
Share on other sites
pugpete1108

just realised you are a million miles away from me, so would be far to uneconomical to have it shipped.

 

cheers though B)

Share this post


Link to post
Share on other sites
zx-vts
just realised you are a million miles away from me, so would be far to uneconomical to have it shipped.

 

cheers though B)

 

no probs mate.

 

Thanks again for the info guys.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×