bunji 2 Posted June 26, 2010 (edited) Help me out here people, please. Last weekend I cleaned the car and decided I was going to leave it at home instead of at work all week. I thought to myself I shall disconnect the battery to save the alarm going off, or wearing down the battery. Do you think I could open the bonnet? No! I have used the search function on here, and used some of the info.... to no avail. I have removed the front grill(In anger - I have a spare) and looking through the gap I can see a spring attached to a catch. And the manual is of no use whatsoever! So.... what to do next? Help me please. Edited June 26, 2010 by bunji Share this post Link to post Share on other sites
Baz 421 Posted June 26, 2010 (edited) From underneath the car i've reached up between the rad and engine and managed to feel around the top of the rad/slam panel for the bonnet release cable a few times after doing silly things like leaving my keys under the bonnet on a locked car... Worth a try? I presume you're bonnet release catch has broken or similar? Edited June 26, 2010 by Baz Share this post Link to post Share on other sites
bunji 2 Posted June 26, 2010 I think it may be a stretched cable, its still attached but ain't giving in. Maybe the lock is jammed in the hole... (ooo eerrrrr) I shall have another look in a bit. Share this post Link to post Share on other sites
welshpug 1,648 Posted June 26, 2010 try getting someone to place pressure on the bonnet as you tug at the cable. Share this post Link to post Share on other sites
Tesstuff 222 Posted June 26, 2010 Have you not got a local Pikey site? Grab a 9 yr old from there , it will take him seconds. He has to do it with his old Transit all the time. Share this post Link to post Share on other sites
jimistdt 1 Posted June 26, 2010 If you actually got the grille off, you will manage to open it by sliding your hand under to where the catch is, with the other hand push down on the bonnet with a fair bit of force, then squeeze the catch upwards. I have to do it with mine at the minute as the release is knackered. I can be done, but it will be tight. Share this post Link to post Share on other sites
bunji 2 Posted June 26, 2010 I tried to put my fingers under the bonnet to pop the catch.... big hands... no good. So, I lay down on the floor and put my hand up between the rad and block. Fumbled around for a few minutes and eventually found the cable.... gave it a yank and pop went the bonnet. I shall have to change the cable I think, a job for Monday if I get the chance. Thanks for all ya help. Share this post Link to post Share on other sites
gixxerash 0 Posted June 27, 2010 I had the same problem with mine could not get it open as the end of the cable snapped off So i got a set of these bonnet pins worth a look and you never have to worry about the cable going again. http://cgi.ebay.co.uk/FLUSH-FITTING-LOCKIN...=item1e585a432c Ashley.. Share this post Link to post Share on other sites