hillbilly 3 Posted June 25, 2010 Im going to the scrapys tomorow to get a 406 m/c for my gti6 break conversion on my 205. Can anyone give me the code of the side to make sure i get the correct one? Thanks Ryan Share this post Link to post Share on other sites
welshpug 1,645 Posted June 25, 2010 I personally wouldn't buy one from a scrapyard, its the only thing that is between your foot and the brakes. They're all the same size though. Share this post Link to post Share on other sites
ade 4wd 11 Posted June 25, 2010 There are only two types of master cylinder on the 406, one with two ports (abs) and one with four ports(non abs). But as welshpug says using a second hand one is a bit of a gamble. Share this post Link to post Share on other sites
Daviewonder 533 3 Cars Posted June 25, 2010 I went to get one of these the other week and there were two 4 port master cylinders listed, one was ally and one was cast steel. What one are people using on there 205s? Share this post Link to post Share on other sites
j_turnell 134 3 Cars Posted June 25, 2010 You need the 4 port from a non abs car, it has "23" stamped on the bottom. Share this post Link to post Share on other sites
hillbilly 3 Posted June 25, 2010 Ok thanks guys. Where can i get a new one from? Share this post Link to post Share on other sites
j_turnell 134 3 Cars Posted June 25, 2010 GSF i'd imagine or worth ringing round you local motor factors, but make sure you get a bendix item and nothing else. Share this post Link to post Share on other sites
Rolando 10 Posted June 29, 2010 there pricey though, i got a quote the other day i think it was nearly 100quid inc vat Share this post Link to post Share on other sites
welshpug 1,645 Posted June 29, 2010 you'd gamble £100 on your life? though if you really do begrudge spending £100, a 22.2mm one works just fine and is far cheaper, it'll give you more pressure too. Share this post Link to post Share on other sites
ade 4wd 11 Posted June 30, 2010 Try http://www.buypartsby.co.uk/ Part number - LM21007 Genuine Bosch 4 port 23.81mm master cylinder, £45.47 delivered to your door. Share this post Link to post Share on other sites