Anyone Tried Using 50mm Drop Springs On Standard Dampers?

[matt1900 0]

Do they work ok or would the shocks bottom out??

 

Ta.

[blessed6383 0]

Do they work ok or would the shocks bottom out??

 

Ta.

 

chances are they will bottom out mate wouldn't go any lower than -30mm on standard shocks can always fit one and try but pretty sure they will bottom out when fitted to the car

[zebedy101 0]

The springs are too short for the struts mate. I had some apex ones on mine for about a month, they were bouncy as hell and really didn't do the car any favours.

[shalmaneser 26]

Why would you want to go 50mm lower, it'll bugger your car good and proper!

 

Get some decent Eibach springs, only about £90 on the bay. 25/30mm drop looks great and preserves the handling.

[matt1900 0]

Reason being that I dropped the rear beam 1 tooth (bodge method) and it now sits pretty damn low at the back so I want the front to match.

 

But i'm taking your advise guys and getting -30mm springs. I'm sure they'll level the car out fine without the risk of cracking the chassis leg going over bumps.

 

Cheers lads.