Rolling Road Tuning

[series111 21]

Hi all i have now finally run my freshly rebuilt mi16 engine in now i am in a dilema in where to take it to get setup as i am in cumbria LAD motorsport are not far away has anybody had theirs tuned there ? if so are they any good?

[welshpug 1,657]

what do you mean by setup?

 

if its a standard engine there's not much you can do apart form setting the CO up at the local MOT station.

 

if its anything else you'd better let us know

[series111 21]

what do you mean by setup?

 

if its a standard engine there's not much you can do apart form setting the CO up at the local MOT station.

 

if its anything else you'd better let us know

ok mate i no you cannot set it up through the ecu as this is preset but you can adjust the tps sensor to stop jerky driving which i have when in 5th gear at about 2000 revs and you can also set the co as you do at a mot station therefore making a smoother drive therfore i will not ask again as i am only asking if LAD motorsport are a decent place to go (no need for cocky replys!!!!!!!!!!!!!!!!!!!!!!)

Edited June 14, 2010 by series111

[matt.f 16]

Now LED(Larton Engine Developments).

My 1.9 road rallycar has one of their engines and ive taken it to another (more local) rolling road after being set up by LED and the operator said 'theres nothing i can tell you to do to it,its spot on'.

Was amazed how well it went and he said he had been working on 205 gti's since they were new and the engine was awesome(was loving the fact it got 155bhp and was intreeged to know what cam was in it).

My mates car is up there now having a rebuild(engine,beam,suspension etc).

[series111 21]

Now LED(Larton Engine Developments).

My 1.9 road rallycar has one of their engines and ive taken it to another (more local) rolling road after being set up by LED and the operator said 'theres nothing i can tell you to do to it,its spot on'.

Was amazed how well it went and he said he had been working on 205 gti's since they were new and the engine was awesome(was loving the fact it got 155bhp and was intreeged to know what cam was in it).

My mates car is up there now having a rebuild(engine,beam,suspension etc).

Thanks for a honest reply!!!!!!!!!!!!

[welshpug 1,657]

you can setup the tps yourself, its very easy, all you need is a multimeter and a 7mm spanner.

[series111 21]

you can setup the tps yourself, its very easy, all you need is a multimeter and a 7mm spanner.

ok so there is no need to waste my money if i can do that is there any guides on this as i use my mates co analiser cheers for the help....

[welshpug 1,657]

its all in the haynes manual

[series111 21]

its all in the haynes manual

spot on that was my next port of call thanks again....

[Miles 331 1 Cars]

And I doubt any RR would adjust these items anyway, same old thing over and over

The Haynes is spot on for this and even adjusting it won;t net any more or less power

[series111 21]

And I doubt any RR would adjust these items anyway, same old thing over and over

The Haynes is spot on for this and even adjusting it won;t net any more or less power

thanks for the advice i will have to adjust the tps and co.....