Braided Lines Through The Car

[MiamiGus 0]

HI, i'm considering using braided brake lines straight from the master cylinder through the car, (being lazy now) does anyone know how much line it will use??

Cheers.

[Cameron 16]

About 10m to be safe.

[MiamiGus 0]

Was thinking that. Thanks Cameron. Hows your project coming along??

[welshpug 1,655]

I used 25 feet of copper hard line (at a cost of £9) to totally re-instate a 205 using rear discs, single line rear with 1.6 compensator, plus 4 braided lines (deleted short pair to calipers as per later factory vehicles)

[Batfink 201]

For already made up hoses you are looking at roughly £230

[MiamiGus 0]

Any suggestions on the best place to get ready made lines?

[welshpug 1,655]

from Batfink (kev) who runs KAM tracing, or Miles, pugracing, or Powers (alex) Torques.co.uk.

[Miles 331 1 Cars]

I don;t offer ready madde lines, Only made to order to your length as everyone run's the pipes differently it's impossible to do really

[marksorrento205 80]

Have a read through Spikys track car project thread, he did the same and he listed everything he used.

[welshpug 1,655]

Have a read through Spikys track car project thread, he did the same and he listed everything he used.

 

 

most of which would have been supplied by Torques.co.uk

[Cameron 16]

Was thinking that. Thanks Cameron. Hows your project coming along??

 

Pretty good, got some nice upgrades on the way just waiting for parts to be machined.