Engine Loom

[Guest spinners]

I have two f reg 1.9s and trying to make a good one out of the two. I have just taken the engine out of the red one which has a 7 pin engine loom. So I have come to remove the engine from the grey one and it has no engine loom.

All it has are the two temp sensors and the oil temp sensor on a smaller brown plug.

Any explaination would be a help they both have the same build number but pugs are a bit foreign to me but on the other hand easier to work on than escort rsts.

Cheer Dave

[Paul_13 212 1 Cars]

Search brown multiplugs mate, that is what your on about. Keep both and don't go cutting them.

 

Use the google search in my sig, might help

Edited May 21, 2010 by Paul_13

[Guest spinners]

Search brown multiplugs mate, that is what your on about. Keep both and don't go cutting them.

 

Use the google search in my sig, might help

 

 

Cheers for your help mate is was going to leave it well alone.

Cheers Dave

[Miles 331 1 Cars]

Cross over year so you would have the Phase 1 loom and Phase 1.5 loom as to speak even thou the trim level's changed other parts didn't until they ran out of them.

Mind it would be a very eary F plate to have this