Xu10j4rs Gasket Help,tb To Plenium One?

[pugpete1108 62 1 Cars]

i have been told by james (wracing ) that after looking at msq i have a leak or air somewhere after the butterfly.

 

on investigation i have found that there is no gasket between the throttle body and the manifold? it looks as though there should be one (large squarish type) but when i went to pug all they have on the diagram for the rs engine is an o ring in between.(mine doesnt have this either?)

 

does anyone know what there should be in there? gasket o-ring or both? if a gasket does anyone have a part number?

 

cheers

pete

[205gtichris 0]

It should have a paper gasket , i got 1 for 60p from peugeot, 1635 C3 should be the part number , they are the same as the early 406 v6 gasket.

Edited May 13, 2010 by 205gtichris

[pugpete1108 62 1 Cars]

It should have a paper gasket , i got 1 for 60p from peugeot, 1635 C3 should be the part number , they are the same as the early 406 v6 gasket.

 

you my friend are a star

 

why does it not come up on the diagram for the rs setup then? and do i need the oring i have just ordered from them

[205gtichris 0]

I just checked again and it seems the later gti6 does use a o ring

[welshpug 1,657]

some have an o-ring, some have a paper type gasket

 

Picture for phase 1 is shown as a Gasket, Phase 2 as an o-ring.

 

 

 

same part number......

[pugpete1108 62 1 Cars]

I just checked again and it seems the later gti6 does use a o ring

 

hmm . i'll keep it on order then and also order a paper gasket too ,can go wrong at 60p

 

wp - same part for both oring and gasket?

 

cheers

 

pete

Edited May 13, 2010 by pugpete1108

[welshpug 1,657]

yup!

 

1635C3 SEAL PIECE 0.50 GBP

[pugpete1108 62 1 Cars]

yup!

 

1635C3 SEAL PIECE 0.50 GBP

 

they quoted me £2 odd for the oring?

 

i'll go and check tomorrow what they have ordered and order the above anyway.

 

ta very muchly

[CosKev 16]

Buy a sheet of gasket paper is the easiest and make your own

 

If your Pug dealer are like my local ones the gaskets come in a bag of 10,and they won't sell you one

[pugpete1108 62 1 Cars]

went round the pug garage this morning to check what they had ordered and the pug man was there (not the other muppet i had yesterday) i said i ordered a gasket yesterday, he said 'xu10j4rs?' i said yes and he produced a paper gasket for 60 whole english pence.

 

diamond.

 

engine back together today then

Edited May 14, 2010 by pugpete1108

[wracing 19]

I hope this will solve your issues pete, an air leak is what it looks like. I have yet to look at your msq, bit pushed for time

 

James

[pugpete1108 62 1 Cars]

I hope this will solve your issues pete, an air leak is what it looks like. I have yet to look at your msq, bit pushed for time

 

James

 

nop its not that. cant for the life of me find out what it is?

 

i've had the manifold off and checked every hole for to make sure its either got a gasket or an o ring. odd mate????

[davev 1]

have you tried running the engine and put your hand in front of the throttle body to listen for the hiss, or maybe try spraying carb cleaner around any gaskets to see if the revs rise?

 

and being a gti6 have you removed/checked around the resonator box.

[pugpete1108 62 1 Cars]

have you tried running the engine and put your hand in front of the throttle body to listen for the hiss, or maybe try spraying carb cleaner around any gaskets to see if the revs rise?

 

and being a gti6 have you removed/checked around the resonator box.

 

 

i have had the resonator box off, pretty sure i fitted the oring when i put it back on.

 

might need to doube check i suppose just to make sure.