Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
davey205

Header Tank Part Enquiry

Recommended Posts

davey205

Did a search, can someone tell me if part number 130353 "Degassing tank" is correct for my car, Peugeot parts assured me it was but the picture on the screen looked a bit like a phase 1 bottle.

Share this post


Link to post
Share on other sites
pug_ham

Hard to say, for the 205 GTI it shows the same one for pre & post 91 but if you need the black one its listed under the XUD7T as 1303.73.

 

Have a look on http://www.miamistu.co.uk/pug/ or signup on service box

 

Graham.

Share this post


Link to post
Share on other sites
davey205

Thanks for the reply mine is non ABS so im guessing .53 is correct as he said.

Share this post


Link to post
Share on other sites
pug_ham

1303.53 appears to be the earlier one like you said (its listed for both pre & post 91 mod), the one listed as for the XUD7T shows the correct phase 2 black header tank with the level sensor underneath which is what is fitted to my 90 phase 2 GTI.

 

Which do you presently have fitted?

 

S33GAV is selling a black one now for £3 iirc.

 

Graham.

Share this post


Link to post
Share on other sites
davey205

Bugger! thanks ill look into getting that second hand one from S33GAV, this will be almost £50 that ive had blown because Peugeot insisted it was a correct part, this and a sensor a few months back serves me right for not checking beforehand.

Edited by davey205

Share this post


Link to post
Share on other sites
davey205

Bugger, its a phase 1 tank with the level sensor at the top Im assuming this wont work with mine?

Share this post


Link to post
Share on other sites
davey205

It's a long shot........ but is there anyway my incorrect tank (1303.53) could be adapted to work? Are the sensors the same?

Share this post


Link to post
Share on other sites
pug_ham

Sensors are completely different & wiring to the plug differs as well.

 

Phase 2's have three wires to the plug & the earlier ones just the two.

 

Graham.

Share this post


Link to post
Share on other sites
JayCC

I bought a clear one. I think it was listed as a diesel. It's the Phase 2, clear header tank.

 

If i find the part number i will post it.

Share this post


Link to post
Share on other sites
davey205

Yep, I've got the right one now, much better, might be changing the water hoses on mine, anybody know how much they are from Pug? £170 seems a bit steep (bbm)

Edited by davey205

Share this post


Link to post
Share on other sites
Sign in to follow this  

×