Gt28 Turbo, Actuator Set To .9 Bar, But Will Only Hit Standard Boost

[m_attt 31 1 Cars]

as title, i have a gt28 turbo, with the actuator set at .9 bar by pug1off also have a dump valve and cooler fitted, but its only hitting standard boost. I guess this is down to the boost control solenoid, so can i bypass it with a t-piece or fit a bleed valve inline (ran one on old turbo at 1 bar for 8 months)?

 

thanks in advance

 

Matt

[sounds of silence 2]

either put the bleed valve in or just put the vac pipe straight to the actuator bypassing the boost control and that would give you .9

[m_attt 31 1 Cars]

will this cause the ecu to throw any wobblys if its not geting a reading from the solenoid?

[sounds of silence 2]

no it will be fine so long as you also leave the solenoid connected via the ecu just disconnect it from the vac pipes

[m_attt 31 1 Cars]

ideal thanks,

 

so just connect the actuator pipe to the manifold pipe? what so i do with the third (were does it go)

[sounds of silence 2]

yup blank the 3rd one off

[m_attt 31 1 Cars]

cheers bud, thanks for the help

[sounds of silence 2]

no worries