Long Tails On Harness Straps

[rallysteve 22]

I have trial fitted my Sabelt Harnesses as you may have seen in my project blog. Only thing is that I have long tails left on the shoulder straps after mounting onto the cage bar. What should I do with these as I hate the look of them just dangling down. Should I roll them up and zip tie to the belt or cut them off?

 

Cheers Steve

[welshpug 1,656]

roll them up and cable tie, not sure if you are actually allowed to cut them.

 

if you move the buckles further forwards towards the seat you'll use up a lot of the loose bit.

[rallysteve 22]

roll them up and cable tie, not sure if you are actually allowed to cut them.

 

if you move the buckles further forwards towards the seat you'll use up a lot of the loose bit.

 

Cheers hadnt thought of that, although think the instructions that came with said to keep the buckle as close to the bar as possible.

 

Steve

[Tom Fenton 1,541]

You could cut the loose end if you wish and melt the end with a lighter to stop them unravelling. As it is not a loaded part of the belt you can shorten it.

 

However I would leave them long, for the simple reason that if you ever decide to move them to another car, or sell them on, they are more use long.

[rallysteve 22]

You could cut the loose end if you wish and melt the end with a lighter to stop them unravelling. As it is not a loaded part of the belt you can shorten it.

 

However I would leave them long, for the simple reason that if you ever decide to move them to another car, or sell them on, they are more use long.

 

Thanks I will roll them up and cable tie them below the belt buckle.