Obey_R 23 Posted April 30, 2010 From an old MOT advisory... Nearside Front Lower wishbone front bush Suspension arm has slight play in a pin/bush (2.4.G.3) Is it a big problem? It was an advisory from a previous MOT pass, but it didn't come up on the recent MOT fail... could have been fixed I guess but no receipts to prove. Ross. Share this post Link to post Share on other sites
Iain-gti 6 Posted April 30, 2010 Bush is the rubber mount on the wishbone between the chassis and the wishbones this just allows certain amount of movement, its not a big problem just could affect handling and maybe tracking if really worn. Iain Share this post Link to post Share on other sites
miamichris 9 Posted April 30, 2010 From an old MOT advisory... Nearside Front Lower wishbone front bush Suspension arm has slight play in a pin/bush (2.4.G.3) Is it a big problem? It was an advisory from a previous MOT pass, but it didn't come up on the recent MOT fail... could have been fixed I guess but no receipts to prove. Ross. One of the bushes or the balljoint (doesn't say which one!) in your wishbone is worn. If the balljoint is dead then you have to buy a new wishbone because the bj's are not replaceable. Share this post Link to post Share on other sites
Obey_R 23 Posted April 30, 2010 Thanks guys, will get it checked out at some point then! Share this post Link to post Share on other sites