Mi16 Water Hose Pictures

[blessed6383 0]

does anyone have any pictures of how to plumb in the mi16 in a 205?

[Baz 421]

You could've found out using a search considering this has been done to death, but something like this;

 

[jim205GTI 3]

Just depends on what oil cooler you're using, if at all......

[gixxerash 0]

Just depends on what oil cooler you're using, if at all......

 

hi there just jumping in on the band wagon on this one you said about the oil cooler i would rather not use 1 but i am about to convert my 1.9 205 to the alloy mi16 soon i picked the block up last night and it has the oil cooler sandwich plate with the threaded bolt thing that you screw your oil filter onto have you any ide where i would get a new threaded bolt thing without the spacer bit for the sandwich plate so it would just screw into the block then the filter onto that any help will be much apreciatd

 

also my water block union only has 2 sticking out and 1 coming out at the side any ideas about that where the hoses would go

Edited May 2, 2010 by gixxerash

[Baz 421]

hi there just jumping in on the band wagon on this one you said about the oil cooler i would rather not use 1 but i am about to convert my 1.9 205 to the alloy mi16 soon i picked the block up last night and it has the oil cooler sandwich plate with the threaded bolt thing that you screw your oil filter onto have you any ide where i would get a new threaded bolt thing without the spacer bit for the sandwich plate so it would just screw into the block then the filter onto that any help will be much apreciatd

 

also my water block union only has 2 sticking out and 1 coming out at the side any ideas about that where the hoses would go

 

Wherever you plumb them in to the coolant system. Late cars and 309's have a top hose that has to pipes for this purpose.

 

You can get the sandwich plate adapter from Peugeot, perhaps obviously?

[gixxerash 0]

sorry to be thick lol i am tryingto read as much as i can into this conversion and i have wires and hoses clips and all sorts flying around in my head to muckh knowladge to take in at once lol so as my 1 has only 2 pipes comiing off the water union would i do away with the 3rd one that goes around to the thermostat housing in the pic above.

 

and i wanted to do away with the sandwich plate so the filter bolts straight to the block i suppose maybe something off the 106 perhaps might do the job.

sorry to be a pain lol

[blessed6383 0]

sorry to be thick lol i am tryingto read as much as i can into this conversion and i have wires and hoses clips and all sorts flying around in my head to muckh knowladge to take in at once lol so as my 1 has only 2 pipes comiing off the water union would i do away with the 3rd one that goes around to the thermostat housing in the pic above.

 

and i wanted to do away with the sandwich plate so the filter bolts straight to the block i suppose maybe something off the 106 perhaps might do the job.

sorry to be a pain lol

 

 

i have mine all plumbed in now mate will get some pics and a diagram up tomorrow if get a chance bud

[gixxerash 0]

i have mine all plumbed in now mate will get some pics and a diagram up tomorrow if get a chance bud

oh please mate that would be fantastic i can't find any pics like from different angles and stuff of wiring and hoses i got the lump and now starting to think oh oh so any you can provide will be much appreciated will pm you my email address if that makes it easier cheers buddy

[blessed6383 0]

oh please mate that would be fantastic i can't find any pics like from different angles and stuff of wiring and hoses i got the lump and now starting to think oh oh so any you can provide will be much appreciated will pm you my email address if that makes it easier cheers buddy

 

 

yes mate pm me your email address and wil get them done asap you may need to use a blanker on the side of the thermostat ousing as this is what i have done

[gixxerash 0]

pm'd you and i will have a look at what you send nice one buddy

[Baz 421]

Little tip for you both;

 

http://forum.205gtidrivers.com/index.php?act=Search&f=15

[gixxerash 0]

Little tip for you both;

 

http://forum.205gtidrivers.com/index.php?act=Search&f=15

 

yeah tried that first but was after some pics possibly of someone doing it step by step sort of thing and could not find any if you know of a link where i can find this i would much appreciate it.

[Paul_13 212 1 Cars]

We're not trying to be arseholes here but this has been covered manyyyy times. Use the search in me sig \/ if you don't get on with site search function.

[gixxerash 0]

i do appreciate what your saying paul i'm sure it has been coverd many of times lol was just having a little trouble tracking some clearer pics down but the starter of this topic has agreed to email me some now he has his put in so hopefully fingers crossed that will answere it lol

[Baz 421]

yeah tried that first but was after some pics possibly of someone doing it step by step sort of thing and could not find any if you know of a link where i can find this i would much appreciate it.

 

Try harder, this isn't the first time it's been hinted that you pull your finger out. And, no, i won't, or even try to do as you ask. Because then i'll just be fuelling your 'nah, can't be bothered, i'll just post a thread up, massaging my post count in the process and get someone else to tell me what to do and answer my questions' attitude.

[blessed6383 0]

lol yer didn't think any of you are as your all very helpfull on here just some time like gixxerash said its hard to find certain things or maybe understand them as know i have probs trying to understand the wiring diagrams in my haynes manual lol so always good if people have the pics of certain thing

anyhows guy cheers for the help

[gixxerash 0]

Try harder, this isn't the first time it's been hinted that you pull your finger out. And, no, i won't, or even try to do as you ask. Because then i'll just be fuelling your 'nah, can't be bothered, i'll just post a thread up, massaging my post count in the process and get someone else to tell me what to do and answer my questions' attitude.

 

i'm not trying to start an argument here but i have been looking i have been on here for abouts 5 hours now trying to get some close up pics when i used the search option for that catergory it pulled up 23 pages and i went through them all but still could not find anything so i can be bothered just i'm sorry for being new to the forum i personally don't think i'm the one with the attitude all i'm after is a little help i will do my best to find out as much as i can myself.................

[pug_ham 244 3 Cars]

I seriously doubt you'll find any "close up pics" of where the water hoses run to but the majority of people try to keep the plumbing of the coolant system as close to the original 8v as possible to make it easier to find replacement hose should they ever be needed.

 

I know I can't remember seeing any in my time on the forum.

 

The sandwich plate on your Mi16 is for the water / oil heat exchanger as used in the 405 which is best removed & forgotten about, especially if your Mi has an alloy sump because these cool the oil very effectively.

 

The union through the sandwich plate should unscrew leaving you with the small stub for the oil filter thread.

 

Graham.

[Baz 421]

Tbh i really don't see why you'd need actual pictures, from seeing this;

 

You could've found out using a search considering this has been done to death, but something like this;

 

 

 

It'll then be pretty clear when you actually come to doing it.

Edited May 2, 2010 by Baz

[gixxerash 0]

many thanks pugtorgue thats spot on advise thats all i was after nice buddy..

[blessed6383 0]

haha ok guys can we leave all the bitching and just talk about the one thing we all have in common the cars!

 

and im sorry if some of us dont use proper english bt is it really that bigger deal?

 

some of us may not have the greatest education but we all like our pugs right????

[Paul_13 212 1 Cars]

Here's a thread regarding GTI6 engine coolant piping

 

Similar to a S16 almost, probably only a few differences. It's been a while since I had my S16 engine and only had it for a week, the bores were soo badly corroded I had to scrap it. I had a diagram on my build thread but I can't find it.

 

I can take pics of my GTI6 setup if needed?

[gixxerash 0]

i should be ok now thanks knowing that you try to keep it as close to the 8v set up many thanks anyway...