Cam Seal

[Paul Smith 0]

Hi I am going to have a go at changing the cam seal as this is where I appear to have a hefty oil leak which is annoying, are there any top tips as to the best wat to change this?

 

Thanks

 

Paul

[j_turnell 137 3 Cars]

Im around tomorrow Paul if you wanted to pop over, can show you how to do the beam mounts also

[Rob Turbo 3]

Time the engine up, remove cambelt, remove cam pulley, screw a deep threadded screw into the side of the seal and lever it out with pliers, you will probably need a few screws around the seal and work the seal out by levering each one a bit at a time. Then oil the new seal, slide it over the end of the cam then tap it in with a socket. Then put it all back together.

[spark-plug 1]

Thx i need to do this moro too as well as fit a new racing head and twin 45's should be an intersting day prob be on an off here when i get stuck lol