Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Rolando

309 Gti Pas Rack

Recommended Posts

Rolando

i fitted a 309 gti PAS rack to my 205 gti but now because i have to get rid of the pump due to engine mods, can i still run my 309 rack and block the holes somehow?

 

or should i just fit the orginal 205 gti non PAS rack?

 

Cheers Ro

Share this post


Link to post
Share on other sites
Baz

Yes. Just remove the ram and associated parts.

Share this post


Link to post
Share on other sites
Rolando

ahh cool thanks.

 

is there any advantages in keeping the 309 rack though?

 

or would it be better to fit the original and sell the 309 rack?

 

you seem to know everything Baz :angry:

 

cheers

Share this post


Link to post
Share on other sites
Baz

Well, not quite everything but thankyou! :angry:

 

The only advantage is in the fact it's a PAS rack, it has half a turn or so less than a non-PAS rack, otherwise 309/205 ones are identical, the extra length is in the rod ends.

Share this post


Link to post
Share on other sites
Rolando

ahh so i'd be better off fitting the orginal 205 rack and selling the 309 rack then?

 

all that hassle and money just to go back to the original, i hate cars lol

Share this post


Link to post
Share on other sites
Baz

No, the one you have is fine, it just has half a turn less than a standard rack, in essence a quick-rack.

Share this post


Link to post
Share on other sites
Rolando

ohh i see, so in theory the steering will be sharper but have less lock?

Share this post


Link to post
Share on other sites
Baz

Less turns lock to lock yes, may feel a little heavier when slow speed manouvering etc yes, but it's not that bad!

Share this post


Link to post
Share on other sites
Rolando

ahh ok, thanks for your advice :D

 

much appreciated

Share this post


Link to post
Share on other sites
richardjw

Never knew that the PAS rack was less lock-to-lock. I'm stripping my PAS rack down and fitting it for sure now!

 

Another alternative to blanking it off would be to run a Saxo or 106GTi electric pump. Some on eBay - but i got to sorce one from a scrapper for £40! Bit heavy though.

 

Shout if you want more information.

Share this post


Link to post
Share on other sites
Rolando

yeh i was considering fitting a saxo pump as i've got a spare one but not 100% sure on the plumbing and wiring it up?

Share this post


Link to post
Share on other sites
Baz
yeh i was considering fitting a saxo pump as i've got a spare one but not 100% sure on the plumbing and wiring it up?

 

The answers are always just a few clicks away;

 

http://www.205gtidrivers.com/articles/s-elpas.html

 

http://forum.205gtidrivers.com/index.php?s...+power+steering

 

http://forum.205gtidrivers.com/index.php?s...+power+steering

 

http://forum.205gtidrivers.com/index.php?s...+power+steering

Share this post


Link to post
Share on other sites
Rolando

Thanks Baz :)

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×