Mi16 Crank Position Sensor Wiring!

[speedy 2]

Been ages since i have been here! but i need your help once again

 

I am connecting a programable ecu using the original wiring loom from the mi16 my question is this...

 

beside the shield wire there are 2 wires red ang green. which one is the positive?

 

Thanks

[welshpug 1,657]

Doesn't say on Autodata if one or the other is positive, only that both are input signals 2 V/1 ms.

[ifcho 0]

Been ages since i have been here! but i need your help once again

 

I am connecting a programable ecu using the original wiring loom from the mi16 my question is this...

 

beside the shield wire there are 2 wires red ang green. which one is the positive?

 

Thanks

 

There is no positive. One goes to the ground, one is the signal. You need to try both variants and choose the one that's best.

[Sandy 191]

Pin 1 Signal +

Pin 2 Signal GND

Pin3 Screen

[speedy 2]

thanks a lot guys!