Harness Mounting

[hexhamstu 9]

So I've bought some backing plates for the 2 lap belt points. Can i just put the one coming off the back into the socket for the back middle seat lap belt, by putting the end of the seat belt onto the harness?

 

Anyone done something like this, basically I want the harness to be easily removable, I guess it just clips onto the eye bolts, which is quick enough. Where have people positioned this eye bolt?

Edited March 23, 2010 by hexhamstu

[Baz 421]

Eyebolts can go into the standard seatbelt fitting holes, belt rail at the sill, and where the rear seatbelts go under the rear seat/rear side panel. You may want to drill a hole in the exhaust tunnel for the LHS lap belt though.

[hexhamstu 9]

But I want to keep the original seat belt

[Baz 421]

So? You can do, just replace the current bolts with the eye-bolts.

[hexhamstu 9]

So? You can do, just replace the current bolts with the eye-bolts.

As simple as that! Lovely stuff. Cheers Baz.

[Baz 421]

Np!

[pugpete1108 62 1 Cars]

Eyebolts can go into the standard seatbelt fitting holes, belt rail at the sill, and where the rear seatbelts go under the rear seat/rear side panel. You may want to drill a hole in the exhaust tunnel for the LHS lap belt though.

 

tis what i did, used the rears for the shoulder straps the lower belt 'rail' hole for the outers and drilled and fitted a plate just behind the centre console in the tunnel for the two middle straps.

[Silky 33 1 Cars]

What are the best eyebolts to use Baz ?

 

I've got to mount my harnesses soon so need to buy some.

 

Do they just screw/bolt in, or do you weld them in ?

[boombang 2]

Standard screw in ones mate.

[pugpete1108 62 1 Cars]

if anyone needs some mounting plates let me know as i brought too many.