12v Feed For After Market Fan

[porter_bmx 0]

hi all, i have a ally rad with a after market fan, i want to wire it up so it has a constant feed when the ignition is on. could you point me in the direction to where i could wire it up to. pictures would be great thanks

[welshpug 1,657]

same place as the standard fan would do the trick.

[porter_bmx 0]

the only thing is the wiring for the old fan, (go's to blck box with two fuses) doesnt seem to work, ive try'd poking the fan wires around the box and nothing seems to work. if i put the fan wires onto the starter motor it works, so i know that the fan is ok, i may be totally wrong about this but ....

[welshpug 1,657]

have you got it plugged into the right slot? fuse ok?

[porter_bmx 0]

the fuses are fine, which slot would it be?

[porter_bmx 0]

try'd the black box again still no luck. also the hazzard switch deosnt work (only just noticed) any ideas??

[Simes 248 2 Cars]

I've got the complete stand alone fan loom for sale if that helps, simply plug and play and all your problems will vanish in seconds.

 

pm me.

[porter_bmx 0]

p.m'd any ideas on the hazzard switch?

[Guest ruffryder]

i had a very similar problem and it was the earths nexted to your front head light there are like connecting blocks [yellow i think buy done mine a year ago] that bolt straight in to the front panal all i did was cut off the wires from the block [throw the block] and crimped the ends with a o ring crimp worked fine after.

[porter_bmx 0]

i'll give it try tomorrow