Am I Right To Think Its Bottom Arm

[willo-1 0]

My pug 205 gti has developed a slight nock from passinger side when i go over bumps,. I checked wheel bearing NO play so am i right in thinking its the bottom arm... thanks....

[Paul_13 212 1 Cars]

It could be your:

 

Bottom arm balljoint/bushes

Trackrod end

Antiroll bar droplink

Knackered top mount rubbers/bearings

Loose subframe

Ovalled hub

 

Could be any of the above, get underneath and start having a play.

[willo-1 0]

It could be your:

 

Bottom arm balljoint/bushes

Trackrod end

Antiroll bar droplink

Knackered top mount rubbers/bearings

Loose subframe

Ovalled hub

 

Could be any of the above, get underneath and start having a play.

Thanks for quick reply ....i checked most yesterday hub was fine my assumption was bottom arm balljoint

[Paul_13 212 1 Cars]

Did you take the hub off the balljoint? If you can spin the balljoint with your fingers it's f*cked.

Is the gaitor still in one piece and the grease still present?

[willo-1 0]

No i didnt go that for i just checked for play on hub,& bottom arm

[wildejon 7]

I find that its most likely to be a drop link when I have any sound that knocks over bumps. Not saying its always the case but has been the thing to go most often on my cars.

[willo-1 0]

thanks im getting it checked over on tuesday

[willo-1 0]

it was drop link getting it replaced asap now