Quick Shift Bracket

[mmt 15]

Could I instead fit the quick shift bracket fitted to lengthen the "L" shaped bracket to the gearbox bracket?

 

The quick shift extention is hitting the manifold. Will I get the same effect if I move the extention to the bracket on the gearbox? ´

 

Hope this makes sense!

[mmt 15]

Anyone

[Baz 421]

No, you'll actually be increasing the amount of movement needed to select gears by extending the box's selector arms, and possibly put the gear lever in an odd position.

 

You could shorten them, but i suspect this may then make the gearchange difficult!

 

 

The only real ways of doing it are on the L-pivot quadrant/bell crank or the lever itself.

[mmt 15]

Thanks Baz.