Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
zebedy101

Gti6 Dyno Results What Figures Are We All Getting?

Recommended Posts

zebedy101

Evening all,

 

on Sunday I had my 205 gti6 on the dyno results are as follows

 

Measured power - 168.8bhp

 

Power corrected - 158.8bhp (didn't really understand the corrected part because power was measured at 168.8)

 

Power at the wheels - 148.4bhp

 

Torque - 135lb per foot

 

I was really happy with my results apart from the corrected part that just confused me. My engine is standard and only has an air filter + magnex backbox. I am just wondering really what results others running the gti6 lump have seen?

 

Many thanks, Seb

Share this post


Link to post
Share on other sites
welshpug

was the AFR checked?

 

power is about right for most engines I have seen, you get good ones and not so good but most healthy ones are within a few of the 167bhp.

 

torque seems a tad low though, what downpipe and centre section do you have?

Share this post


Link to post
Share on other sites
M@tt

E887XUA.jpg

 

that was my standard 6 engine

Share this post


Link to post
Share on other sites
zebedy101

Thanks for the reply welshpug what do you mean by Afr?

 

I am using the standard xsara vts down pipe and I think it may be a 1.9 centre box. The bore is 2" I think from memory. They did say that the torque was a little down but mine seemed to be the highest of all the gti6's by a couple of lb's. The power at the wheels was a good couple hp more than the others even though I had slightly less power than some others is this possibly to do with the vts box as I was the only one running it?

Share this post


Link to post
Share on other sites
zebedy101

I'll upload a picture of the power graph.

Share this post


Link to post
Share on other sites
zebedy101

a1309509.jpg

 

3886be42.jpg

Share this post


Link to post
Share on other sites
Miles

Mines 169bhp, can't recall the torque but again good, all std bar my exhaust system, on a 306 thou

Share this post


Link to post
Share on other sites
Simes
Mines 169bhp, can't recall the torque but again good, all std bar my exhaust system, on a 306 thou

 

...and 250,000 miles!

Share this post


Link to post
Share on other sites
CaptainK

When mine was tested as a standard GTi6 it made 162bhp fly / 135bhp wheels. But on the same day it was RR'd with a bunch of FTOs and all of them were reading a little lower than their previous runs.

Its not on ITBs and runs around 190 fly / 160 wheels, but for comparison I'm gonna get it RR'd at the same place it was RR'd before the ITB and mapping session, just because.

Share this post


Link to post
Share on other sites
andyjstone

Mine makes 181, but it has bodies and management, last map print out is below - you have to be careful comparing these though, as a lot depends on the RR set-up:

 

powergraph.jpg

Share this post


Link to post
Share on other sites
All Praise The GTI

only 181 with jenveys and emerald?! :) or is that at the wheeels andy?

Share this post


Link to post
Share on other sites
andyjstone
only 181 with jenveys and emerald?! :) or is that at the wheeels andy?

 

Yes, at the wheels.

Share this post


Link to post
Share on other sites
All Praise The GTI

fair play :)

what did it make at emerald when it was mapped? fly and wheels if you know mate?

Share this post


Link to post
Share on other sites
andyjstone
fair play :)

what did it make at emerald when it was mapped? fly and wheels if you know mate?

 

Sorry, don't have that info. It hasn't been mapped by Emerald, Miles did the conversion and he had a map he put in, then I had it tweaked by some dodgy company in Reading and then after blowing that engine up it was re-mapped with a new engine by Torque of the Devil.

Share this post


Link to post
Share on other sites
All Praise The GTI

o right nasty :P

181 atw is pretty good tho :)

hopefully il have my bodies on soon if all goes to plan :D

i think kates 6 made 197 with bodies and emerald B)

Share this post


Link to post
Share on other sites
andyjstone
i think kates 6 made 197 with bodies and emerald :D

 

I really don't think you can go too much by what power it makes on the RR, they are all so different you can't really compare - really need to do a RR day and take them all down at the same time, now that could be interesting :)

Share this post


Link to post
Share on other sites
All Praise The GTI

i agree. so many different rr's bound to be varying accuracy

besides its not about figures its how it drives :)

Share this post


Link to post
Share on other sites
Cameron

Andy, how much do TOTD charge for mapping? I think I'm definitely going there when I have my bodies on.

 

As for power, mine made 183bhp ATF on Newman PH2 cams and a custom 2.5" exhaust system, but then mine is 100cc down. :)

Share this post


Link to post
Share on other sites
welshpug

how many torques Cameron?

 

I want to get mine RR'd as soon as its back together and run in, not sure whether to put my PH2's in or not....

Share this post


Link to post
Share on other sites
andyjstone
Andy, how much do TOTD charge for mapping? I think I'm definitely going there when I have my bodies on.

 

TBH I can't remember how much I paid, but I do remember it was quite reasonable.

Share this post


Link to post
Share on other sites
Miles

Have to say after driving Andy's car from dropping him off the map is very good, I didn;t find any bad spot's at all which is very unlike me

Share this post


Link to post
Share on other sites
andyjstone
Have to say after driving Andy's car from dropping him off the map is very good, I didn;t find any bad spot's at all which is very unlike me

 

Just make sure you give it back!

Share this post


Link to post
Share on other sites
Baz
Yes, at the wheels.

 

IMO that'd be at the fly rather then the wheels to be quite honest.

Share this post


Link to post
Share on other sites
Alastairh
o right nasty :(

181 atw is pretty good tho :lol:

hopefully il have my bodies on soon if all goes to plan :P

i think kates 6 made 197 with bodies and emerald ;)

 

off the top of my head, it was 191 (I was with her when she got it mapped).

 

Al

Share this post


Link to post
Share on other sites
Cameron
how many torques Cameron?

 

149 lbft of them.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×