Possibly Screwed Drive Shafts?

[stuart1298 6]

wonder if anyone could help....

 

when i get to about 50 i have a slight judder, through the steering, itried to drive through it when i do 60 its undrivable, i have had the balancin, wish bones, and tracking sorted, but still there is a major problem, i am having the shafts changed tomorrow, 55 brand new for the pair is worth a pop, good old staff discount, but if this doesnt work i am at bit of a loss.

 

i have tried 2 sets of wheels and still the same

[Anthony 1,003]

Is it much worse under acceleration, but eases up some what on cruise? If so, sounds like it might be one of the inner CV joints that has failed - they tend to cause major vibration and shaking that's worse under load/acceleration.

[stuart1298 6]

yeah, does seem a little more aggressive under acceleration, not much worse, jus a little, but i've spoke to a few of my customers seem to think it could be that, but we'll find out tomorrow

[rallysteve 22]

yeah, does seem a little more aggressive under acceleration, not much worse, jus a little, but i've spoke to a few of my customers seem to think it could be that, but we'll find out tomorrow

 

If its not just under acceleration/turning i would suggest it could be a bent or unbalanced wheel too.

 

Steve

[alphacharlie 0]

wonder if anyone could help....

 

when i get to about 50 i have a slight judder, through the steering, itried to drive through it when i do 60 its undrivable, i have had the balancin, wish bones, and tracking sorted, but still there is a major problem, i am having the shafts changed tomorrow, 55 brand new for the pair is worth a pop, good old staff discount, but if this doesnt work i am at bit of a loss.

 

i have tried 2 sets of wheels and still the same

 

 

Where did you get the "shafts" from matey??

Cheers

AC

[t16ryan 1]

Check all your gearbox bolts are tight also.