Para 82 2 Cars Posted March 5, 2010 I've asked that question on 306 forum but nobody seems to bother to give an answer. Is there any difference between those calipers or are they the same ? Thanks in advance Share this post Link to post Share on other sites
welshpug 1,645 Posted March 5, 2010 An UK S16 uses 266 x 20mm discs and a much smaller pad, the caliper itself is the same as pretty much all 405's bar very low powered models and the T16. The gti6 (and European S16's with the RFS engine+6 speed box) use a 283 x 22mm disc and a much larger brake pad. Share this post Link to post Share on other sites
Tom Fenton 1,536 Posted March 5, 2010 (edited) I had the S16 type calipers on my car, without a servo fitted (266 mm discs). They were really quite poor, I put this down to the small pad area needing the servo to give an acceptable "bite". Swapping to 283mm GTI6 type brakes with no other modifications and the brakes are now a lot lot better. Anyway to answer your question, yes the calipers are different. Edited March 5, 2010 by Tom Fenton Share this post Link to post Share on other sites
Para 82 2 Cars Posted March 5, 2010 Hmm I just bought set of S16 calipers which were fitted with 266mm discs. They should still be noticable better then standard 1.9 GTI ones. Mine are from Europe , bought in Europe and they still 266 mm one's ... Share this post Link to post Share on other sites
welshpug 1,645 Posted March 5, 2010 would have been an early S16 then, with the RFY engine and 5 speed box Share this post Link to post Share on other sites
davev 1 Posted March 5, 2010 the 266 set up i find to be a nice feeling set up even with a standard master cylinder. i got a massive difference when changing though i think the standerd calipers were not the best as they felt like i was using to bits of wood to stop Share this post Link to post Share on other sites