Megajolt On Mi16

[gazzer 1]

im planing to my mi16 on twin 45s with megajolt ignition, i have made the loom a while ago for running normal fuel enjection and ecu, now the question is do i cut out all the fuel injection and ecu parts from this loom or make a new loom from scratch and sell the other ??????????????????????????????????????????????????

[205turbo 32 2 Cars]

i have a megajolt, and its ignition only and would build the loom from scratch you should have a loom semi built with it

[gazzer 1]

what about the two brown blocks that are conected under dash that you have to splce into old mi16 loom, cant i just take the wires to there respective postions ie starter motor , alternator. cylinder block sencers etc.

[iamjackiechan 0]

when i did the loom for my engine which the same setup, i ended up ditching the ecu and every loom wire connected to the ecu. so your best bet is to start from scratch

[boldy205 75]

not sure what you are trying to get at . Surely you need to set up the ignition setup as the mega jolk instructions?

[boldy205 75]

You just want to take the mega jolt harness and make a whole new harness really, It will be neater and if you take your time and make it tidy, your car wil be more reliable.

Matt