Ford Wheels

[custard-rallye 25]

hi i have found a set of wheels im going to get i think but the offset is 40 on a 7 j rim will they go on my uk 205 rallye without sticking out miles and would i need spacers??

[pug_ham 244 3 Cars]

You'll need spacers to use ET40 rims, especially if they are 7" wide.

 

Also the centre bore of the Ford alloys is smaller iirc so they wouldn't fit onto your hubs anyway.

 

Graham.

[GeorgeXS 32]

You'll need spacers to use ET40 rims, especially if they are 7" wide.

 

Also the centre bore of the Ford alloys is smaller iirc so they wouldn't fit onto your hubs anyway.

 

Graham.

 

Surely if he's going to need spacers the centre bore wont be an issue??

Edited February 19, 2010 by GeorgeXS

[Daviewonder 533 3 Cars]

Surely if he's going to need spacers the centre bore wont be an issue??

 

It will if he gets hubcentric spacers for a peugeot.

[hcmini1989 16]

You'll need spacers to use ET40 rims, especially if they are 7" wide.

 

Also the centre bore of the Ford alloys is smaller iirc so they wouldn't fit onto your hubs anyway.

 

Graham.

im confused are you talking about genuine for alloys or ford fitment alloys here ^^^.as i had a set of oz turismos and they were ford fitment.and never had any issues with the cenre bore .but they were the wrong offset

[custard-rallye 25]

they are 4x108 so they should go straight on just need spacers

[Jrod 7]

they are 4x108 so they should go straight on just need spacers

 

Not if they have the wrong centre bore still.

 

It's not a problem anyway as you can buy Ford to Peugeot spacers.

[custard-rallye 25]

i got group a compo th's in ford fitment that needed the centres bored out i got it done by a machining company but i thought it was juset cause they were group a ones that the centres were different

[Jrod 7]

Ford use 63.4mm centre bore, Peugeot 65.1mm.

[pug_ham 244 3 Cars]

im confused are you talking about genuine for alloys or ford fitment alloys here ^^^.as i had a set of oz turismos and they were ford fitment.and never had any issues with the cenre bore .but they were the wrong offset

Both, genuine or aftermarket Ford fitment alloys have the wrong offset but aftermarket alloys might not have the problem with different bore sizes, I'll have to check the OZ super turismos which were fitted to my 306 when I bought it & see but they had 20mm spacers fitted which would've fixed the size difference anyway..

 

Graham.