Not 205 But Still Pug Related

[Ben 0]

Right I plan on treating the gearbox on my 306 to some new oil, christ knows when it last would of been done and its beginning to feel a bit notchy!

 

Any hints or tips on doing it without chucking oil everywhere and/or getting very wound up? A quick check in the haynes suggests its a pain to fill up so is there an easy way?

 

Cheers

[Tom Fenton 1,542]

Yes there is an easy way, drain from the bottom, then fill by removing the breather plug at the top of the gearbox. Much easier than trying to fill through the level plug.

[Ben 0]

Cheers, i'll have a look today and see how I get on.