[project] Peugeot 205 Twin Turbo

[peter 20]

This must look class from behind, have you had the rear wheels on yet?

[dexter1002 4 1 Cars]

This thing is ridiculous ! But amazing!

[johniban 59 1 Cars]

shame most or the pics dont work

[Ballyafb 6]

Both days its local to us, really cheap so seems stupid not to, also we get some great datalogs to fine tune with. Sorry mate I should have said!!

 

Few more pics of tonight's progress.

 

 

 

406 cable gear linkage in it round about position, fed up of gear linkages dropping off, bending or getting in the way!

 

Thanks

 

James

 

Forgive me if it has been covered already, but the cable gear linkages....

I am trying to do a BE cable shifter conversion, but cannot find out what the exact parts are that I need. You say you used 406 cables and gear stick; what brackets did you use on the gearbox (what car did they come from)?

 

Just trying to get the right parts the first time round.

 

Thanks very much,

Alex

[allanallen 528 2 Cars]

I would think he's using an ML box which uses cables already.

Or some magical gearbox made from unobtanium and witchcraft to harness the 1000bhp or whatever the engine makes.....

[jamie_1992 66 1 Cars]

is it just me or do most of the pictures in this thread not work

[wracing 19]

Unfortunatly i was using facebook to host the photos, they have changed the links unfortunatly.

 

Its a 406 linkage onto a GTI6 box the cables are the correct length i clipped them on and just made a bracket up. One major problem is that is the pattern is reversed (down for 1st up for 2nd) which is fixable and i drew up a linkage but converted to rwd.

 

Thanks

James

[calvinhorse 870]

Holy s*it has it really been a year since this was updated!?

 

Any progress?

[wracing 19]

Yea, the year has gone quick. the car is apart for the winter receiving a few upgrades. new crank and stainless exhaust manifold

[Ballyafb 6]

Ok, 406 linkages on a 306 gearbox, sounds good. Any pictures of the bracket that you made please?

[andy-mac 4]

Yea, the year has gone quick. the car is apart for the winter receiving a few upgrades. new crank and stainless exhaust manifold

 

good to hear your not finnished with this project pitty most off the pics are missing interesting reading

[Andy205 2]

Gonna be great to see this beast finished!

[Ballyafb 6]

I understand you are running a BE3 gearbox with cable shifter?

 

Where did you get the brackets for the gearbox from, ie, a 406, 806, 208 etc.

 

I want cable shift on my car (a BE1 but still possible), and I know the 406 gear stick works well, so its just the brackets I am struggling with.

 

Thanks very much,

Alex