Pfc 274 Bhp Rallye Article

[lemmingzappa 75 1 Cars]

PFC Rallye.pdf - 1.66MB

 

Just thought i'd share this article I saw in Performance French Cars, something to read I guess.

[jonnygoodhand 0]

That's GTI6Boy's Rallye. Looks a cracking car!

 

Those decals look familiar too

Edited February 12, 2010 by jonnygoodhand

[Baz 421]

Nice!

[Baz 421]

Good work Nick, car looks great as usual, be nice to know what you've done to combat the fuel starvation too, if anything yet!

 

Congrats on the little 'un too btw!

Edited February 12, 2010 by Baz

[davey sprocket 14]

Awesome!

 

What's that harness bar attached to though with no cage in there??

Surely not just welded to the tinfoil-thin inner panel of the c-post (or whatever you call that??)??

[brumster 135 1 Cars]

Cool good read.

[chippy 0]

nice i like it

[brumster 135 1 Cars]

Certainly nice with the ZF diff, and the Quaife gearset will help with the 1st-2nd ratios. Andy's box mods will certainly strengthen it up too. But gawd, this thing must be just crying out for 6 properly-spaced clicky gears so wish I'd picked up one of these engines when I had the chance, before Longman closed shop

[GTI6BOY 29]

Thanks guys

 

The harness bar has solid ends which are tapped out and a bolt go's through the original seat belt holes which are already strenghend. It does not budge...trust me

 

I was gonna put a swirl pot and pump in the boot to stop the stavation.

[davey sprocket 14]

The harness bar has solid ends which are tapped out and a bolt go's through the original seat belt holes which are already strenghend. It does not budge...trust me

 

 

Nice one dude!

 

Awesome motor and congratulations on getting the car featured, must be a special feeling!

[taylorspug 7]

Nice Nick, good work mate.

 

Christ almighty theres actually a car in PFC worth reading the magazine for! What a shocker that is these days!

[Batfink 201]

Hi Nick

What clutch and flywheel do you have? Standard size or the smaller one for the 5 1/2 inch clutch. I was wondering what you did for a starter motor....

 

Kev

[GTI6BOY 29]

It's a Ap racing touring car jobbie with a touring car flywheel. They are standard size but lightweight and does not have counting teeth so you have to mount the tdc sensor on the bottom pully

[Batfink 201]

thanks for that. I was wondering if you had the same as me as mine is smaller so I cannot use a standard starter motor so was hoping you had solved that problem.

[allye 530 3 Cars]

Saw the mag in Tesco yesturday and bought it straight away! Great read, the rest of the mags not bad either, first time I have bought it and will do again in the future.

 

(I'v gone from North wales to Isle of Wight now, I'm all over the place so rarely get to go on here any more)

 

Ali

[Para 82 2 Cars]

Can someone upload this on different server please ? this link doesn't seems to work for me.

[lemmingzappa 75 1 Cars]

http://depositfiles.com/files/0zis31mtd

 

Done.

[Para 82 2 Cars]

Thanks, it's working fine now

[ravydavy 0]

My swirl pot is under the bonnet. i had fuel starvation issues. Soon as it gets to 3/4 tank its a pain in the arse

[dodsworth_gti 11]

great build

 

been trying to think of a trick way to mount a bar for my harnesess saw this and its a right idea,simple but affective.

 

now i just dont want to copy you haha so im going to build one coming of the rear beam mounts

 

top car well done