Valve Guides On Xu10j4

[kutija 1 1 Cars]

Where to get a bronze valve guides for xu10j4 head except at peugeot dealer?

And what is the price?

 

Mainly I need exhaust valve guides...

[petert 588]

Where to get a bronze valve guides for xu10j4 head except at peugeot dealer?

And what is the price?

 

Mainly I need exhaust valve guides...

Get your local head place to fit K-Line inserts. Unless it's a turbo or a race car, the inserts will be fine.

[kutija 1 1 Cars]

It's a turbo car Peter.

It's Goran from T16 forum

[welshpug 1,657]

try Guy Croft http://www.guy-croft.com/

[Mandic 0]

I bought them at local Pug dealer cca 2 yrs ago, price was 70EUR for a set of 8. For 20EUR more You can get custom ones at local machine shop over here.

 

Cheers

 

Ziga

[petert 588]

The only aftermarket guides I've seen were cast iron and weren't machined correctly for the stem seal. So I sent them back. I hope nobody else ever uses them! In your case I'd just fork out the cash for Peugeot oversize guides and do the job properly.

[sideways danny 0]

Get your local head place to fit K-Line inserts. Unless it's a turbo or a race car, the inserts will be fine.

 

K-line inserts are superb. I know engine builders that prefer them to using totally new guides because of the extra lubrication given to the valve stem so helping slow down any wear occuring again. I've used them a number of times on high performance builds, highly recommended IMO

[kutija 1 1 Cars]

It seems that exhaust valve guides for xu9j4/xu10j4/xu10j4te can't be bought at Peugeot.

 

I found this

http://www.enginestuff.co.uk/product_info....oducts_id/60784

 

Anybody ever bought something from this site??

 

Also there are bronze valve guides listed at hiflowheads at 6.75 pounds each.

Anybody had experience with hiflowhead's guides?

[welshpug 1,657]

I never got a reply from Enginestuff about buying everything to refit my cylinder head.

 

 

Have you tries Guy Croft?